prave s nim som to instaloval. ale povodne to vypisovalu inu chybu - ze nemoze najst voodo3/banshee. potom som skusal a skusal rady z googla az sa mi podarilo toto
Opening SDL viewport.
Bound to GlideDrv.so
Loaded render device class.
Initializing Glide...
Found Glide: 2.60.00.0415
gd error (glide): Can't find or access Banshee/V3 board
grSstQueryHardware failed
No localization: SDLDrv.Errors.Failed3D (int)
<?int?SDLDrv.Errors.Failed3D?>
Signal: SIGSEGV [segmentation fault]
Aborting.
Exiting.
Name subsystem shut down
Allocation checking disabled
Segmentation fault
idem este hladat ale fakt uz neviem co s tym moze byt. este ma napada ze niekde som cital ze treba vypnut VGA BIOS Shadow - lenze bios k mojej mobo tuto moznost akosi nema... asi nahodim nejaky OC
podla navodu som postupoval prvy krat. vtedy to vypisalo chybu ze nenasiel banshee/v3. potom som hladal na googli, skusal vselico az to doslo do stadia ze ani glide nevedel najst. teraz som to znova spravil podla navodu a nic....
[size=9]kayman@melon:~$ ls -la /usr/lib | grep libglide
-rw-r--r-- 1 root root 717198 2003-08-28 12:41 libglide3.a
-rw-r--r-- 1 root root 585607 2003-08-28 12:41 libglide3.so
kayman@melon:~$ cd /usr/src/linux
kayman@melon:/usr/src/linux$ cat .config |grep DRM
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
kayman@melon:/usr/src/linux$ cat .config |grep FB
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
kayman@melon:/usr/src/linux$ su
Password:
melon:/usr/src/linux# modinfo tdfx
filename: /lib/modules/2.6.12-mh3/kernel/drivers/char/drm/tdfx.ko
author: VA Linux Systems Inc.
description: 3dfx Banshee/Voodoo3+
license: GPL and additional rights
vermagic: 2.6.12-mh3 preempt K7 gcc-3.3
depends:
melon:/usr/src/linux# exit
kayman@melon:/usr/src/linux$ cd /etc/X11/
kayman@melon:/etc/X11$ cat XF86Config-4 | grep Load
Load "GLcore"
Load "dri"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xtt"
kayman@melon:/etc/X11$ cat XF86Config-4|grep -A 2 DRI
Section "DRI"
Mode 0666
EndSection
kayman@melon:/etc/X11$ cat XF86Config-4|grep -A 2 -B 3 tdfx
Section "Device"
Identifier "Voodoo3"
VendorName "3dfx"
Driver "tdfx"
VideoRam 16384
EndSection
kayman@melon:/etc/X11$ cat XF86Config-4|grep -A 2 -B 3 tdfx
Section "Device"
Identifier "Voodoo3"
VendorName "3dfx"
Driver "tdfx"
VideoRam 16384
EndSection
kayman@melon:/etc/X11$ cat XF86Config-4|grep -A 9 -B 4 DefaultDepth
Section "Screen"
Identifier "Default Screen"
Device "Voodoo3"
Monitor "Compal M700"
DefaultDepth 16
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
kayman@melon:/etc/X11$ lsmod |grep tdfx
tdfx 2752 0
kayman@melon:/etc/X11$ glxinfo |grep rendering
Xlib: extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No[/size]
asi zmazem komplet X-y a nahodim vsetko odznova...
kayman@melon:~$ cat /var/log/XFree86.0.log |grep -A 21 TDFXDRI
(EE) TDFX(0): [dri] TDFXDRIScreenInit failed because of a version mismatch.
[dri] libdri version is 4.1.0 but version 5.0.x is needed.
[dri] Disabling the DRI.
(II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided NonTEGlyphRenderer replacement
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) TDFX(0): Backing store disabled
(==) TDFX(0): Silken mouse enabled
(**) Option "dpms"
(**) TDFX(0): DPMS enabled
(==) TDFX(0): Direct rendering disabled
(==) RandR enabled
Symbol miRegionEqual from module /usr/X11R6/lib/modules/drivers/tdfx_drv.o is unresolved!
vypisalo to ze nemoze zmazat adresar /usr/X11R6/lib/modules/drivers/ lebo je tam nieco navyse ci co...
tak som zmazal co tam bolo - bol tam tdfx.old.bla.bla.bla (uz si napamatam presne )
po dllllllhom hladani som nasiel na OpenUT taku poznamku:
(NOTE: The DRI contains no support for OpenGL acceleration for Voodoo 1/2 series 3D accelerators. However, Voodoo 1/2 support is still available in XFree86 4.0.x through the use of Glide. Upgrading to XFree86 4.0.1/DRI will not affect Glide or dependent software on Voodoo 1/2 hardware. OpenUT will continue to function with Glide on Voodoo 1/2 even after an installation of XFree86 4.0.x/DRI. Glide under Voodoo 3/4/5 Banshee will not function after an installation of XFree86 4.0.x/DRI).
samozrejme ze mam 4.3.0.1
takze ostava mi
Hrat po opengl (mesa) ktore je pri hrani po sieti pomale..
nahosit stare xfree
nahodit x.org (ale to neviem ci pomoze - skusim zistit)